Sunday, February 13, 2011

HOW TO CONFIGURE AZTECH ROUTER FOR INTERNET

For those who are having problem in configuring their Aztech router, now can easily configure it by following some really easy steps.


Before getting started I would recommend you to switch it on and reset it, to avoid any conflict


1. Open your browser, and in the address bar type 192.168.1.1 and press enter


You will see a login page like this














* The default username and password is admin




2. Put username and password and click on log in






After you are logged in to your router, you will see a page something like this












2. Under Advanced move your mouse over WAN and click on New Connection


You will see New Connection configuration page




On this page we can create a new conenction


1. Give your Connection a Name


2. User ID (Put your User ID, if you don't know than contact your ISP)


3. Your password (Put your Password, if you don't know than contact your ISP)


4. If you have copper line Enter VPI=0, else if you have fibre/ONU than type 8


5. If your line is Fibre/ONU than type 35 else 103 if it is copper.


6. Click on submit


7. Click on Connect


8. To make channges permanently, Click on Save Settings


You have now successfully configured your aztech router for internet

5 comments:

  1. it is driving me to often visit ur blog..nice one!!!i've just follow ur blog...i really hope that u can follow back my freshie blog....

    continue with the impressive tutorial postings! :D

    ReplyDelete
  2. Thank you for liking my BLOG :)

    Keep visiting

    ReplyDelete
  3. Ali,

    I just bought Aztec routers.

    Every night before I go to sleep , I keep it ON for downloading via my lap top.The next morning , when I checked it , the internet icon gone red..no internet at all but when I start to check my computer from sleep mode to active...the internet icon turn green...active.Is there anywhere I need to change the setting ? Thank you. Asri

    ReplyDelete
  4. Try this...

    Create a new connection with the setting provided in this tutorial and delete the quickstart connection. Also make sure you have the latest firmware.

    For firmware downloading check aztech ftp

    ftp://ftp.aztech.com/support/

    Regards,
    Taqi

    ReplyDelete